Drillquest.net New Items

Pump Stroke Counter

Fri, 03 Sep 2010 19:31:28 +0100

Pump Stroke Counter Features: Embedded CPU [PIC12F683] Large 1" x 2 �" LCD Displays Auto Power On/Off Auto Shutdown (Sleep Mode) Push Button Reset Pump Strokes Auto Clear SPM Independent Pump Circuits Long Life Lithium Batteries (4-AA) Standard 3-pin Plug (1&2 Pump) (3 Pump 4 pin) Stainless Steel Case (Nema 4x) Intrinsically Safe Design (Class 1, Division 1, Group A,B,C and D) 1/4" Durable Lexan Windows 20ua Draw (Shutdown Mode) SPM ( 6 - 250 )Count ( 0 - 9999 ) Switch Type (Dry Contact) <7 Volts dc @ .7 ma No calibration Needed Each pump section monitors the total strokes and strokes per minute (SPM). Each stroke counter has 1 micro controller, pic12f683 and 2 LCD display drivers PCF8577cp for each pump displayed. Compare this to other digital types that may have up to 20 or more parts needed to perform the same functions. After 5 minutes of inactivity the pump section will go to standby. The count is held in memory, even during standby. As soon as the counter detects a stroke the LCD�s will power up and the count and strokes per minute will resume. The rate display is updated with every stroke. This saves battery life. Our rate meter uses 4 AA lithium batteries and allows you to replace them in the field saving you expensive replacement battery pack cost. The unit should be in a clean area to replace batteries.

MOBILE CRANE GROVE GMK 5200

Thu, 02 Sep 2010 16:52:16 +0100

200 TON CRANE year: 2005 kilometers: 36.000 working hours: 6.800

5in HWDP

Thu, 02 Sep 2010 14:19:39 +0100

9 joints ex stock

Varco Bushings/Kellys

Mon, 30 Aug 2010 16:56:32 +0100

National 300t swivel

Mon, 30 Aug 2010 16:35:36 +0100

BJ 350t hook

Mon, 30 Aug 2010 15:54:14 +0100

Gardner Denver duplex pump

Mon, 30 Aug 2010 14:08:22 +0100

Varco 500t spider

Mon, 30 Aug 2010 12:48:43 +0100

GE752

Mon, 30 Aug 2010 10:56:47 +0100

GEC MOTOR;DC;DRILLING; 5GE752RPA, SHUNT, 900HP, 750vdc, 960adc, 50.5field amps, Serial: 8902305

GE752 motor

Mon, 30 Aug 2010 10:38:08 +0100

GEC MOTOR;DC;DRILLING; 752US2E, SHUNT, SHAFT HP � 1000, 890RPM; 633V 57A, H, Serial: E93022233

International Tools Spinner

Fri, 27 Aug 2010 16:59:40 +0100

Caterpillar 3516 Industrial Generator Sets

Thu, 26 Aug 2010 21:28:01 +0100

Caterpillar 3516 Industrial Generator Sets. 1500kw standby, 1250kw prime, 1978hp, 2400/4160v, 1800rpm, 60hz. Year 1984, approximately 2300 hours since new on each unit. Convertible to 1250kva prime, 50hz, 1500rpm, 3300v. Serial number is 25Z00524. Engine arrangement# 8N0462. 3 phase, 248 amps, generator end arrangement# A226090002, generator end serial number 90762-4, 6 lead non reconnectable. Air cleaner, block heater, std generator and engine panel, new engine mount radiator, skid mounted. Genset dimensions are 202�l x 68�w x 85�h, approximate weight 40,000 lbs. Price per unit. Please call for more details. Item #6497

Cummins Onan KTA50G1 Industrial Generator Set

Thu, 26 Aug 2010 21:25:21 +0100

Cummins Onan KTA50G1 Industrial Generator Set. 1000kw, 1490hp, 60hz, 277/480v, 1800rpm, 3 phase, 1504 amps. Year 1991, 792 hours since new. Serial number is 33120979. Mounted in Sound Proof Enclosure: 45' (L) x 8' (W) x 10' (H) with 330 gallon fuel tank. Generator model 1000DFLA. Idle speed 575/650. Self contained unit. No leads. Unit was used as a standby for NASA. Please call for more details. Item #6011

Caterpillar D3512 DITA Industrial Generator Set

Thu, 26 Aug 2010 21:21:53 +0100

Caterpillar D3512 DITA Industrial Generator Set. 1000kw, 1443hp, 60hz, 1800rpm, 240/480v, 1504 amp. Year 1989, 680 hours since new. Serial number 24Z02584. Arrangement# 8N5806. CAT SR4 generator end. Please call for more information. Item #5424

Caterpillar 3406E DIT Industrial Engine

Thu, 26 Aug 2010 21:19:04 +0100

Caterpillar 3406E DIT Industrial Engine. 360hp at 2100rpm. Year 2003. 0 hours since new. Serial number 6BR02484. Arrangement# 135-2928. Unit can have ECM Flash to 400HP+ for $1,500 USD additional. Please call for more details. Item #5410

New Caterpillar G3516 LE Natural Gas Generator Set

Thu, 26 Aug 2010 21:16:27 +0100

New Caterpillar G3516 LE Natural Gas Generator Set. 750kw continuous, 60hz, 3 phase, 480v, 1200rpm, 8:1 compression ratio. Year 2006, 0 hours since new. Serial number is ZBA00516. Vertical radiator mounted. Full CAT factory warranty. Please call for more information. Item #5248

Caterpillar D379 Generator Set

Thu, 26 Aug 2010 21:04:42 +0100

Caterpillar D379 Generator Set. 400kw, 60hz, 480v, 1200rpm. 3 phase Brushless Kato generator end. Serial number 68B00974. Good running takeout. Recently serviced and painted. New radiator core installed. Ready to work. Approx Dimensions: 19,000 lbs. / 115� L x 76� H x 63� W.

Detroit Diesel 16VF0153085 Industrial Generator Set

Thu, 26 Aug 2010 21:03:02 +0100

Detroit Diesel 16VF0153085 Industrial Generator Set. 700kw, 60hz, 480v, 1800rpm, 471 hours since new. Serial number 0601952. Unit comes with Kohler 750OZD generator end. The unit was a backup generator. Includes weather proof enclosure with large built in fuel tank.

Caterpillar 3516B Industrial Generator Set

Thu, 26 Aug 2010 21:00:11 +0100

Caterpillar 3516B Industrial Generator Set. 2000kw, 60hz, 480v, 1800rpm. Year 2001, 200 hours since new. Serial number 6HN01082. Sound attenuated enclosure (sound control systems/ sound attenuation: 50db) with breaker and control panel. Does not include fuel tank.

Two New Surplus Stamford Newage Model UCDI224F1L Generator Ends

Thu, 26 Aug 2010 20:57:35 +0100

Two New Surplus Stamford Newage Model UCDI224F1L Generator Ends. 75kw, currently 60hz will also run at 50hz. Both units are SAE 3/11.5, 4 pole, 12 lead with installed AVR. See the specifications for these units in the attached file. Price is per unit.